Paris steam system

Paris the capital of France is served by a large district heating system using steam, in fact the system contains 450 km of steam pipework.

Paris is an important centre of finance, commerce, fashion, science, and the arts. In 2014 Paris received 22.4 million visitors, making it one of the world's top tourist destinations.

Paris is the home of the most visited art museum in the world, the Louvre, as well as the Musée d'Orsay, noted for its collection of French Impressionist art, and the Musée National d'Art Moderne, a museum of modern and contemporary art. Notable architectural landmarks include Notre Dame Cathedral (12th century); the Sainte-Chapelle (13th century); the Eiffel Tower (1889); and the Basilica of Sacré-Cœur on Montmartre (1914).

A district heating is a system of centralised heat production and distribution typically used for urban areas. The system basically consists of heat production sources, and a network of distribution and return pipes. The heat production sources can produce heat only or simultaneously produce heat and electricity (also known as cogeneration). The heat system can meet residential, commercial and industrial needs for heat.

One of the advantages of district heating is that it can use a variety of fuels and heat sources. Natural gas, coal, fuel oil, and renewable fuels such as biomass and waste products can all serve as fuel inputs.

Paris is the largest district heating network in France, and is operated by Compagnie Parisienne de Chauffage Urbain (CPCU). Currently owned by the City of Paris and Cofely, a GDF SUEZ subsidiary, the steam network heats about one third of Parisians.

CPCU has eight power production sites. Two of these are cogeneration plants, while three are waste to energy plants from non-recyclable household refuse. 50% of the steam used by CPCU comes from these three waste-to-energy plants. The steam produced is used primarily for heating but also for domestic hot water and industrial processes including laundry, cooking, sterilization, humidification and food processing.

Some facts and figures on the Paris system:

  • 450 km of steam pipeline
  • Steam lines have diameters between 40 and 1100 mm (1.6 /43 inches)
  • 5 774 sub-stations
  • 8 million tons of steam delivered per year to 460 000 habitations
  • 12 districts supplied
  • 16 Hot water loops in addition to the steam system

In this context a substation is the name given to a facility that uses steam to generate hot water, which is then circulated to new customers on the network. The substation consists of a heat exchanger with steam on one side and circulating water on the other side. The substation contains pumps that pump the hot water to customers who have secondary heat exchangers and pumps within their buildings. The system hot water then returns to the substation to be reheated.

Examples of customers connected to the Paris system:

At 60,000 sq m (196,850 sq ft), the Louvre Museum in Paris is one of the largest and most famous museums in the world. Each year approximately 6 million visitors enter its doors to admire some of the world’s greatest artistic masterpieces. The museum has been a CPCU customer since 1947. The Louvre utilizes steam for heating and maintaining the proper humidity and temperature levels for its art collection.

Parisian Nord East Hospital (hôpital Robert Debré). Gas central heating was previously used for half of the surface area of the hospital (and individual electrical heating for the other half). This was changed under an efficiency project whereby the hospital was connected to the Paris network using a 6 MW steam heat exchange station. This resulted in a reduction in energy costs and a decrease in CO2 emissions.

Posted by Admin on 03/07/2015




Place a Comment

Want to participate?

Sign In

© Copyright Steam Main Limited 2016-2017 All Rights Reserved

Site by Banilla